Fiber Splicing
Six-motor precision core alignment
Automatically identify fiber type
Industrial dual CPU for fast response
5-inch high-resolution color display, button + touch dual operation
GUI intelligent graphic operating system, automatic splicing, real-time correction of optical fiber position
7800mAh large-capacity lithium battery, typically heated 350 times by welding
Three-in-one fixture, suitable for various fiber types such as bare fiber, rubber-covered wire, jumper, etc.
Precise design, waterproof, dustproof and fall-proof
Model | FA-88S |
Number Of Motors | Six motors |
Processor | Industrial Quad-Core Dual Processor |
Alignment Mode | Core alignment/Autofocus |
Applicable Optical Fiber | SM single mode, MM multi mode, DS dispersion shift, NZDS non-zero dispersion shift, etc. |
Fiber Diameter | Cladding：80~150μm，Coating layer：0.1~3mm |
Weld Loss | 0.02dB（SMF） 0.01dB（MMF） |
0.04dB (DSF) 0.04dB(NZDSF) | |
Welding Time（Typical Value） | 6s（Fast mode） |
Heating Time（Typical Value） | ＜15s |
Pull Test | 1.96~2.25N |
Heat shrink tubing | 60mm，40mmAnd below |
Graphic display | 5-inch LCD HD touch screen |
Magnification | 380 times |
Welding record | 10000 groups |
Battery capacity | 7800mAh，300 times welding and heating |
Battery life | 300 ~ 500 cycles of charge and discharge, users can replace by themselves |
Lighting lamp | Built-in high brightness LED, wide lighting area |
Work environment | Temperature: -10 ~ 50 ℃, humidity: 0 ~ 95% RH, altitude: 0 ~ 6000m |
Operation interface | GUI graphical interface |
External power supply | AC：100~240V，60/50Hz，0~1.5A；DC：10~15V |
Interface | USB |
Size | 144mm (L) × 142 mm (W) × 151 mm (H) (without rubber protective sleeve) |
Weight | 1.8kg (without battery), 2.1kg (with battery) |
