Fiber Splicing
ccurate fiber core alignment of six motors;
Automatically identify that type of the optical fiber;
Industrial dual CPU, fast response;
5-inch high-resolution color display screen, button + touch dual operation;
GUI intelligent graphic operating system, automatic splicing, real-time correction of optical fiber position;
7800mAh large-capacity lithium battery, typically heated 350 times by welding;
Three-in-one fixture, suitable for various optical fiber types such as bare fiber, rubber wire, jumper, etc;
Precise design, waterproof, dustproof and fall-proof;
Specification | Parameter |
| Model | FA-66S |
Number of motors | Six motors |
Processor | Industrial Quad-Core Dual Processor |
Alignment mode | Core alignment/autofocus |
Applicable optical fiber | SM single mode, MM multimode, DS dispersion shift, NZDS non-zero dispersion shift, etc. |
Fiber diameter | Cladding: 80 to 150 μm, coating: 0.1 to 3 mm |
Weld loss | 0.02dB（SMF） 0.01dB（MMF） |
0.04dB (DSF) 0.04dB(NZDSF) | |
Weld time (typical) | 6s (fast mode) |
Heating time (typical) | ＜15s |
Pull test | 1.96~2.25N |
Heat shrink tubing | 60mm, 40mm and below |
Graphic display | 5-inch LCD HD touch screen |
Magnification | 380 times |
Welding record | 10000 groups |
Battery capacity | 7800mAh, 500 times welding and heating |
Battery life | 300 ~ 500 cycles of charge and discharge, users can replace by themselves |
Lighting lamp | Built-in high-brightness LED, wide illumination area |
Work environment | Temperature: -10 ~ 50 ℃, humidity: 0 ~ 95% RH, altitude: 0 ~ 6000m |
Operation interface | GUI graphical interface |
External power supply | AC：100~240V，60/50Hz，0~1.5A；DC：10~15V |
Interface | USB |
Size | 144 (L) × 142 (W) × 151 (H) mm (excluding rubber protective sleeve) |
Weight | 1.8kg (without battery), 2.1kg (with battery) |
