Fiber Splicing
4.3 inch high resolution screen.
4 motors and 5200mAh Li battery with continuous
Splicing and heating about 250 times.
Supports customization in various colors.
Model | FA-36 |
| Number of motors | 4 |
Alignment method | Cladding alignment, manual alignment |
Applicable optical fiber | Any common optical fiber, rubber-insulated optical fiber and patch cord meeting the requirements of ITU-T T G. 651 to G.653, G.655 and G.657. |
Fiber diameter | Cladding: 80-150μm, coating: 0.1-3 mm |
Joint loss (typical) | 0.03dB (SMF)0.02dB (MMF) |
0.04dB (DSF); 0.04dB (NZDSF) | |
Engagement time (typical) | 8 seconds (fast mode) |
Heating time (typical) | ＜18 s |
Tensile test | 1.96～2.25N |
Protective sleeve | 60mm, 40mm and a range of protective sleeves |
Graphic display | High Performance 4.3 Touch LCD |
Magnification | 300 times |
Fusion recording | 30000 groups |
Remote maintenance | 55W |
Battery capacity | 11. 1V, 5200mAh |
Battery life | Cycle count: 300 ~ 500 times, can be replaced by customer |
Service life of electrode | Typical: 5000 counts, customer replaceable |
Construction lighting | Built-in light with high brightness and large surface |
Work environment | Temperature: -10 ~ 50 ℃; Humidity: 0 ~ 95% RH; Altitude: 0 ~ 6000m |
Operation interface | GUI (Graphical User Interface) |
External power supply | AC:100~240V,60Hz,0~1.5A;DC:10~15V |
Interface | USB / SD |
