Fiber Cleaving
Small size, light weight, lithium battery power supply；
Intelligent cutting program, automatic optimization of cutting times；
Wide range of cladding cutting, meeting the requirement of 80-600 μm cladding cutting；
Lifetime warranty for the whole machine, worry-free after sale.
Model | FCM-400+ |
Applicable fiber type | Quartz optical fiber, active optical fiber, microstructure optical fiber, quartz tube |
Number of cores cut | Single core |
Cladding diameter | 80-600μm |
Coating layer diameter | 160-3000μm |
Adjustment of the holding force | Cladding diameter below 400: adjusted by magnet |
Cladding diameter 400-600 μm: adjusted by magnet and screw | |
Adjustment mode: magnetic manual _ (* 1) | |
Tension setting range | 0-3000 GF (automatic adjustment) |
Range of cutting angles | 0.2 ° (cladding 125 μm) |
0.3 ° (cladding 250 μm) | |
0.4 ° (cladding 400 μm) (* 2) | |
Blade life | Approx. 200000 times (cladding 250 um) (* 3) |
Cutting mode | 200/300/400/500/600 |
Statistics | Total statistics and subtotal (* 4) |
Language | Chinese or English |
Display size | 24 * 13mm display |
Size | 160*100*113 mm |
Weight | 1.95Kg |
Power source | 19V 2.5A |
Battery | Capacity：3000mAh 33.3Wh |
Work environment | Temperature: 0 ~ + 40 ℃, humidity: < 95% (no condensation), altitude: 0 ~ 5000 m |
Storage environment | Humidity: 0 ~ + 60 ℃, humidity: < 95% (no condensation) |
Clamping plate screws may be required when cutting fiber types with cladding diameters > 400 μm and when cutting and clamping softer coatings.
Measured at room temperature using aLarge-core Fiber Cleaver FCM-400+. The cutting angle depends on the state of the environment, the condition of the blade, the method of operation and the cleaning.
10,000 cuts per position supported (at 250 um and 400 μm cladding diameters) 20 positions X 10,000 cuts = 200000 The life of the cutting blade varies with the environmental conditions, the method of handling, and the type of fiber being cut.
Total Statistics: It is used to count the cutting times of the equipment. It cannot be reset by the user.
Subtotal: used to make statistics on equipment maintenance times, and can be cleared by the user.
